Autotuner bietet jetzt spezifisches Datenlogging für die Renault-Gruppe an. Im Gegensatz zum generischen Datenlogging, das auf OBD-II-Standardcodes basiert, verwendet das spezifische Datenlogging vom Hersteller definierte Codes.
Auf den folgenden Steuergeräten:
- Bosch: EDC16CP42 / EDC17C11 / EDC17C42 / EDC17C84 / EDC17CP19 / EDC17CP58 / MD1CS006 / MD1CS016 / ME17.7.20 / ME17.9.20 / ME17.9.23
- Continental: EMS3110 / EMS3125 / EMS3140 / EMS3141 / EMS3150 / EMS3155 / EMS3160 / EMS3161 / EMS3180 / SID307 / SID309 / SID310 / SID321
- Delphi: DCM3.4
- Hitachi: BED434 / BED436 / BED501
- Sagem: S3000
- Siemens: SID305 / SID306
- Valeo: V40 / V50.1
Measured data:
|
AIR
- Atmospheric pressure
- Camshaft position
- Mass air flow
- Mass air flow setpoint
|
BASICS
- Engine speed
- Gas pedal position
- Gear
- Vehicle speed
|
BOOST
- Boost pressure
- Boost pressure setpoint
- Wastegate duty
|
|
EMISSIONS
- Distance after successful regeneration
- EGR rate
- Is regen active ?
- Particulate filter differential pressure
- SCR tank level
- Soot mass
|
FUEL
- Fuel high pressure
- Fuel high pressure setpoint
- Fuel low pressure
- Fuel low pressure setpoint
- Fuel pressure regulator
|
IGNITION
- Ignition advance timing
- Ignition withdrawal
- Knock counter
|
|
INJECTION
- Injection advance
- Injection duration
- Lambda
- Lambda setpoint
- Main injection quantity
- Long term fuel trim
- Short term fuel trim
|
LOAD / TORQUE
- Absolute Load value
- Engine torque
- Gearbox torque limitation
- Max engine torque
- Throttle valve position
- Torque limitation
|
TEMPERATURE
- Atmospheric air temperature
- Engine coolant temperature
- Engine oil temperature
- Exhaust gas temperature
- Intake air temperature
|
|
