New AT Protocol!
🏍️ Work continues on the two-wheel front!
The Denso RH850 and SH7058 ECUs found in Yamaha models are now supported with VR reading via OBD, using your AT Tool. 🔧
⚠️ These protocols require a specific cable depending on the vehicle's production year:
👉 The Yamaha Euro4 OBD 4 Pin cable for models before 2020
 |
👉 The Motorcycle Euro5 OBD 6 Pin cable for models from 2020 onwards  |
Another compatibility to keep expanding our motorcycle coverage. 📈
Stay tuned to discover our upcoming new features! 🔥
Key Features
- Type: Engine Control Unit (ECU) ⚙️
- Mode: OBD VR 🔌
- Readout: Software + Calibration 🧩
- MCUs: R7F701201, SH7058 🖥️
- Write time: 7min (RH850), 3min 30sec (SH7058) ⏱️
- Checksums correction ✅
Compatibility List*
Yamaha Models: FJR 1300 - 2015 / MT-03 - 2018 / MT-07 - 2015 / MT-07 - 2021 / MT-07 - 2025 / MT-09 - 2014 / MT-09 - 2017 / MT-09 - 2021 / MT-09 - 2024 / MT-10 - 2016 / MT-10 - 2022 / Niken - 2019 / T-Max - 2008 / T-Max - 2016 / T-Max - 2021 / Tracer 700 - 2016 / Tracer 700 - 2021 / Tracer 900 - 2015 / Tracer 900 - 2018 / Tracer 900 - 2021 / Tracer 900 - 2025 / XSR 700 - 2016 / XSR 900 - 2016 / XSR 900 - 2022 / XSR 900 - 2025 / XT 1200 Super Ténéré - 2010 / XT 1200 Super Ténéré - 2014 / XT700 Ténéré - 2019 / XT700 Ténéré - 2021 / XT700 Ténéré - 2025 / YZF-R1 - 2015 / YZF-R1 - 2020 / YZF-R3 - 2018 / YZF-R3 - 2022 / YZF-R3 - 2024 / YZF-R6 - 2017 / YZF-R7 - 2021 / YZF-R9 - 2025
Engines: 320cc / 320cc (2020) / 530cc / 560cc / 600cc / 690cc / 700cc / 890cc / 890cc (2014) / 890cc (2021) / 890cc (A2) / 1000cc (2015) / 1000cc (2020) / 1200cc / 1300cc
*The list of motorcycles may evolve over time.
