REMOTE UNLOCK FOR BMW GROUP
Yes, you read that right.
Things are getting serious for Bosch MDG1 ECUs fitted from 2020 onwards across BMW platforms! 🚀
The DDE8 and DME8 versions, featuring the new Bosch protection, are now supported in BENCH after Remote Unlock, with your AT Tool:
- MD1CP032 - TC299
- MD1CS001 - TC298
- MG1CS024 - TC298
- MG1CS049 - TC298
- MG1CS201 - TC298
To check if an ECU is supported, perform a BENCH identification with your AT Tool.
The application will then indicate one of the three following cases:
- The ECU can be handled directly in BENCH. ✅
- The ECU requires a Remote Unlock. 🔓
- The ECU is not yet supported. ⏳
Once BENCH operations are available, you can always perform the OBD Unlock with your AT Tool, and then also benefit from full support with your AT One.
And to make things easier: if a Remote Unlock is required, our team will automatically apply the OBD Unlock during the process. 💡
Good news: A dealership update has no impact on the Remote Unlock. 👍
|
👉 Remote Unlock for BMW MDG1
|
👉 Reusable ECU shipping case |
BMW Bosch MDG1 Opening Procedure!
Enjoy our video that outlines every step of the way to carefully and successfully open your ECU so that it is prepared to be handled by us. 🚀
