Bosch EDC17CV41

New AT Protocol (Beta)!

Dear Users,

A massive software update expanding our agricultural, forestry, construction and commercial truck coverage is now live on your equipment! The Bosch EDC17CV41 (Iveco / CNH) ECU is now supported via 100% OBD Normal Read (NR) in Beta mode on your AutoTuner Tool.

This release unlocks an extensive fleet powered by FPT / Iveco / CNH engines (from 4.5L to 15.9L and up to the 20.0L V8): Case IH, New Holland, Claas and Steyr tractors and combines, Tigercat and Logset heavy forestry equipment, Doosan excavators and wheel loaders, as well as Iveco commercial trucks (Eurocargo, Stralis and Trakker Cursor 13 Euro 5).

💡 Protocol Highlights:

• 100% OBD Method: Read and write directly through the diagnostic port of the machine, no ECU removal required.
• Required hardware: To connect directly through the diagnostic port of your machinery and equipment, this protocol requires the New Holland OBD cable.
• Released in Beta: Your workshop feedback is valuable to help us keep improving this protocol.

🚜 Supported Lineup (Bosch EDC17CV41):

1. Agricultural Machinery & Combines (CNH Group & Partners)

• Case IH:
  • Tractors: Magnum (180 to 380, AFS & CVT), Puma (140 to 240, CVX & X), Maxxum (115 to 150, CVX), Optum (250 to 300 CVT), Steiger (370 to 620, Quadtrac & Rowtrac), Quadtrac (370 to 620), Farmall (100A, 130A, 140A)
  • Combines & Harvesting: Axial-Flow (5140, 6140, 7140, 7240, 8240, 8250, 9240, 9250), AF / AFX Series, Sugar Harvesters 8810
  • Sprayers & Floaters: Patriot (3240, 3340, 4440, 5550), Titan Series Floaters (3040 to 4540)
• New Holland:
  • Tractors: T6 (T6.110 to T6.180), T7 (T7.165 to T7.315 HD), T8 (T8.320 to T8.435), T9 (T9.435 to T9.700), TS6 (TS6.120 to TS6.140)
  • Combines & Forage Harvesters: CR Series (CR 5.85 to CR 10.90), CX Elevation (CX 5.80 to CX 8.85), FR Series & New FR (FR 480 to FR 920 20.0L V8), TC 5.9, TX
  • Grape Harvesters & Special Machinery: Braud (9080N, 9090X), Speedrower, Sprayers SPF/SP, Stackcruiser
• Claas: Arion (410 to 460 - 4.5L), Axion (800 to 870 - 6.7L, 950 - 8.7L)
• Steyr: Profi (4135, 6145), CVT (6150, 6165), Terrus (6270)
• Landini & McCormick: Landini Serie 7 & Powermax, McCormick X7.6 & X8 (VT-Drive)
• Specialized Machinery & Harvesters: Agrifac (Condor 6.7L), Bourgoin (B680), Guaresi (G248, GS48), Grim, Kuhn, Italmix, Storti, Supertino, Gleaner

2. Forestry & Material Handling Equipment

• Tigercat: Feller Bunchers (720G, 724G, 822D, 845D/E, 855D/E, LX830D), Skidders (602, 604E, 610E, 615E, 620E/H, 630E, 632E, 635E, C640E), Forwarders (1055C, 1075C, 1085C), Track Harvesters (875 Logger, 880D, H845D, H855D, LH845D, LH855D), Loaders T234 / 250D
• Logset & Sampo Rosenlew: Logset Forwarders (4F, 5FP, 8F, 10F) & Harvesters (12H GTE Hybrid), Sampo Rosenlew FR28
• Merlo & Dieci: Merlo Multifarmer, Turbofarmer (TF40.9, TF45.11, P65.14) & Roto 60.24, Dieci Pivot T80
• John Deere Forestry: 1270G Harvester & W440 Combine

3. Heavy Trucks & Construction Equipment

• Iveco Trucks: Stralis (Cursor 13 - 450 Euro 5), Trakker (Cursor 13 - 450 Euro 5), Eurocargo (6.7L 252/280)
• Doosan (Earthmoving): Crawler and Wheel Excavators (DX140, DX170W, DX190W-3, DX225 LC-3, DX235 LC-7, DX300 LC-3, DX340 LC-5) & Wheel Loaders (DL200-5, DL250-5, DL280-5, DL300-5)
• Isuzu Trucks: N-Series & NPR / NQR / NRR (3.0D)

🧪 We're looking for your feedback

This protocol is currently released in Beta. Your workshop feedback on agricultural, forestry and construction machinery and Iveco trucks is valuable to help us keep improving it. Share your feedback.

Update your AutoTuner software today and lead the way in heavy-duty, agricultural and forestry calibration services!

The AT Team

Key Features

• Type: Engine Control Unit (ECU) ⚙️
• Mode: OBD NR (Beta) 🔌
• Readout: Calibration 🧩
• MCU: TC1797 🖥️
• Read time: 2min 15sec ⏱️
• Write time: 1min 45sec ⏱️
• Checksums correction ✅
• Requires the New Holland OBD cable (ATOBD200) 🚜